Jet 4

Seeing that I have discovered the new way to design tube jets I proceeded on with another one. Not really referring to the previous jet, I was unaware of the size that I was going after and the end result of the final basic shape appeared twice as big as the previous jet. This was because the design process was made in stages and it evolved through time to the size that it is.

The length is 1800'
Width is 1179'
Height is 396'

Jet 3

I was inspired to build another jet and this time I have magnified the size of it. Also, I have moved on away fro the geometrical shape of the jet and move towards more of the traditional tube shape ones. This design si more narrow bodied tube and has 5 turbine engines with the 5th one at the tail.

There are more details on this jet as I was rather inspired with some concepts that I wanted to put into it.

The length is about 1076'
Width about 695'
Height about 225'

Helicarrier 2

This is the modification of the first helicarrier. This time, the proportion of the shape is adjusted a little more for aesthetics and practicality for weight distribution of the propellers.  This time there is a landing strip. In fact there is 2 of them to balance the design.

The length is about 1900'
Width is about 1080'
height about 185'

Jet 2

This jet is suppose to be the modification of the 1st but I had no time and inspiration to finish and work on the interior.

The Length is about 780', width is 440; and height is 97'.

Helicarrier 1

Inspiration fro the Avenger's SHIELD, I was determine to design one for myself. Seeing that I know nothing about helicarriers, I took a wing at it and came up with what I thought a carrier would look like without reference to the movie. By all means , this is my first attempt for the helicarrier, so I am not following any practicality just yet.

There is no landing deck for this one as I avoided the idea of asymmetrical of the angled landing strip. the only thing available was the take off strip. There are plenty of details that I am still not familiar with so this is designed rather more for the shape.

The length of ti is about 1997'6"
The width is about 982'
Height about 175'

Jet 1

I cannot remember how I got started with jets but the idea of designing one that is so huge that it is physically impossible to fly always seem to capture my attention. But it does not hurt to fantasize about it and draft it out.

Here is a multipurpose jet that holds both large quantities of passengers and cargo, with a built-in container system that can be custom setup for various purpose.

The jet is roughly 765' long, 447' wide and 97' high.

Car 3

My car designs are revolving around the designs of Batmobile and this 3rd car is no exception. The idea was inspired by a couple of concepts sketches and some of Hotwheel designs. This car reflects more of the elongated designs of the past series of Batmobiles. The car was initially design following a the pattern of the middle section of the car and then progressed its design side ways.

There are more details that I would like to add on, especially the interiors but I will come to it much later.

The car length is 24'2"
Width is about 8'
height is almost 5'

Car 2

This 2nd car is a modification of the first, with a lot more refining. This time around I used pre-made parts from other cars to incorporate a better and more realistic design.

Length is 16'
width is 8'6"
height is 4'6"
2 doors
Twin turbos

Imported objects
4 18-wheeler truck rear tires
2 race car front tires
5 bucket seats
V6 engines
Suspension systems

Car 1

My first car design, heavily based on the Batman's Tumbler concept with the large exposed rear tires as well as the front.
The car is 16'6" long; 8'6" wide; 4'8" high.
Rear tires are 3'8" diameter.
front tires are 2'4" diameter.
Twin turbo V6 engine.
5 seater
4 doors